HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Circulators with integrated electronic control with permanent magnet rotor with possibility of continuous adjustment of operation according to the system's real demands. Applied for the circulation of hot and cold water in air conditioning and heating systems and solar systems. Read more
Flow rate | from 0.6 to 3.6 m³/h |
Total head | from 0.7 to 8.0 m |
Max. working pressure | 10 bar |
Max. ambient temperature | 0 ÷ +40°C |
Max. temperature of the liquid | -10°C ÷ +110°C |
Insulation class | F |
Protection degree | IP44 |
Voltage | Single phase 1~230V |
Connections | G1 / G1¼ |
Max. glycol quantity | 20% |
Min. suction pressure | 0.05 bar at 50°C 0.4 bar at 80°C 1.1 bar at 110°C |
Pump body | Cast iron with cataphoretic coating |
Impeller | Technopolymer |
Shaft | Ceramic |
Rotor can | Stainless steel AISI 316 (EN 1.4401) |
What percentage of glycol can be used in the system when the circulator is used for cooling?
The maximum amount of glycol that can be used is 20%.
What is the correct position and installation for circulators and in-line pumps?
Please check the pictograms in the instruction manual.
Can I change the circulator’s settings?
If the circulator has a display, its functions can be changed according to the system’s requirements.
What is the circulator's supply voltage?
The circulator’s supply voltage is 230V
Contact us
* Required