3(L)(4) SERIES

Centrifugal pump standardised to EN733 in AISI 304 stainless steel AISI 304 (3 SERIES), AISI 316 stainless steel (3L SERIES), with 2 or 4 poles motor and with Back pull-out. Read more

Features

Sturdy construction

Sturdy construction

Volute obtained with hydro-forming process

Volute obtained with hydro-forming process

High performances

High performances

ICIM PZH ATEX WRAS
Centrifugal pump EN733 compliant and available in different materials:

• Stainless steel AISI 304 (3 SERIES)
• Stainless steel AISI 316 (3L SERIES)
• Stainless steel AISI 316 micro-cast for some models (3L SERIES)

EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The range consists of the:

• Monobloc 3(L)M SERIES
• With rigid coupling 3(L)S SERIES
• With elastic coupling 3(L)P SERIES

For the 3LM SERIES and 3LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.

The 3(L)S SERIES and 3(L)P SERIES are available with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the Databook

• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems

Technical data

Flow rate up to 240 m³/h
Total head up to 100 m
Max. working pressure 10 bar
Max. temperature of the liquid -10°C ÷ +75°C for H, HS, HW, HSW versions
-10°C ÷ +90°C for standard models
-20°C ÷ +90°C for E version
MEI > 0.4
Poles 2 and 4
Insulation class F
Protection degree IP55
Voltage Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% (up to and including 4kW)
Three-phase 3~400/690V ±10% (from 5.5kW and above)

Materials

Pump body Stainless steel AISI 304 (EN 1.4301) for SERIE 3
Stainless steel AISI 316L (EN 1.4404) for SERIE 3L
Stainless steel AISI 316 (EN 1.4401) precision-cast for SERIES 3L 65-250 80-160/200/250
Impeller Stainless steel AISI 304 (EN 1.4301) for SERIE 3
AISI 316L (EN 1.4404) for 3L SERIES 32, 40, 50
AISI 316 (EN 1.4401) precision-cast for 3L SERIES 65, 80
Shaft Stainless steel AISI 304 (EN 1.4301) for 3 SERIES
Stainless steel AISI 316L (EN 1.4404) for 3L SERIES
Duplex for 3L SERIES 65-250, 80-200/30, 80-200/37, 80-250
Mechanical seal Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM
HS = Silicon Carbide/Silicon Carbide/FPM
HW = Tungsten Carbide/Tungsten Carbide/FPM
HSW = Silicon Carbide/Tungsten Carbide/FPM
E = Graphite/Ceramic/EPDM
Motor support Aluminium - cast iron

What is the difference between 3 SERIES and 3D SERIES?

The difference between the two versions stands in the material they are made of, AISI 304 or AISI 316L stainless steel for 3 SERIES, cast iron for 3D SERIES.

Can a 3 SERIES or 3D SERIES pump be fitted vertically?

Yes, but only under specific operating conditions. Ask our Technical Customer Service for advice.

What is the maximum fluid viscosity that 3 SERIES and 3D SERIES can handle?

Contact EBARA’s Technical Customer Service to check if the pump’s model is suitable for the solution’s physical properties (concentration and temperature). In order to meet the operating requirements according to the liquid’s specific characteristics, the pump’s motor and/or hydraulics may need to be modified.


More details
Do you need more information about this product? Send us your request.

Contact us

* Required

Stay always updated and don't miss our news!

/ 05