HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Single and twin electronic circulators, threaded or flanged, in cast iron, with technopolymer impeller and integrated electronic control with permanent magnet rotor, to be used in medium-sized central and collective systems. Read more
Flow rate | from 2.0 to 9.5 m³/h |
Total head | from 1.5 to 12 m |
Max. working pressure | 10 bar |
Max. ambient temperature | 0 ÷ +40°C |
Max. temperature of the liquid | -10°C ÷ +110°C |
Insulation class | F |
Protection degree | IP44 |
Voltage | Single phase 1~230V |
Connections | G1 / G1¼ / DN32 / DN40 / DN50 |
Min. suction pressure | 0.05 bar at 50°C 0.8 bar at 80°C 1.4 bar at 110°C |
Pump body | Cast iron with cataphoretic coating |
Impeller | Technopolymer |
Shaft | Stainless steel AISI 316 (EN 1.4401) |
Rotor can | Stainless steel AISI 316 (EN 1.4401) |
Can I change the circulator’s settings?
If the circulator has a display, its functions can be changed according to the system’s requirements.
What is the correct position and installation for circulators and in-line pumps?
Please check the pictograms in the instruction manual.
What percentage of glycol can be used in the system when the circulator is used for cooling?
The maximum amount of glycol that can be used is 20%.
What is the circulator's supply voltage?
The circulator’s supply voltage is 230V
Contact us
* Required