HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Self-priming centrifugal surface pump in AISI 304 stainless steel, suitable for domestic use. Read more
Flow rate | from 0.3 to 4.5 m³/h |
Total head | from 11.5 to 49 m |
Max. working pressure | 6 bar |
Max. temperature of the liquid | 45°C |
Max. suction depth | 8 m |
Poles | 2 |
Insulation class | F |
Protection degree | IP54 (IP55 on request) |
Voltage | Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% |
Pump body | Stainless steel AISI 304 (EN 1.4301) |
Impeller | Stainless steel AISI 304 (EN 1.4301) for JEX PPE+PS with glass fibres for JESX |
Shaft | Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid) |
Mechanical seal | Ceramic/Carbon/NBR (standard) |
Motor support | Aluminium |
Which is the maximum temperature for the self-priming pump's fluids?
Usually the maximum temperature of the fluid in a self-priming pump should not exceed 45°C.
Some models can handle fluids at higher temperatures. If the requirements differ from the standard please contact our sales network or our Technical Customer Service.
I have fitted a self-priming pump and I have to start it up. Does the pump's body have to be filled with water?
Yes, when it’s first started the pump must always be filled with water and the procedure below has to be followed:
Contact us
* Required