HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
SWS - SWT
Horizontal self-priming centrifugal swimming pool pump with built-in prefilter. Perfect for ensuring water circulation in swimming pool filtration systems. Read more
Features
Large-size incorporated pre-filter
Practical and easy to use
Easy maintenance
Horizontal self-priming centrifugal swimming pool pump with built-in prefilter.
Perfect for the recirculation of clean or slightly dirty water, water containing chlorine or additives in filtration systems for small and medium-sized swimming pools.
For further technical information see the Databook
• Water circulation in swimming pool filtration systems
Perfect for the recirculation of clean or slightly dirty water, water containing chlorine or additives in filtration systems for small and medium-sized swimming pools.
For further technical information see the Databook
• Water circulation in swimming pool filtration systems
Technical data
| Flow rate | from 4.8 to 31.2 m³/h |
| Total head | from 23.8 to 2.7 m |
| Max. ambient temperature | +40°C |
| Max. temperature of the liquid | +40°C |
| MEI | > 0.4 |
| Poles | 2 |
| Insulation class | F |
| Protection degree | IP55 |
| Voltage | Single-phase 1~230V Three-phase 3~230/400V (SWT) |
| Connections | SWS: - Female thread 1"½ - Connection for PVC pipe Ø50mm to be glued SWT: - Female thread 2" |
Materials
| Pump body | Chemical resistant polypropylene reinforced with glass fibres |
| Impeller | Noryl |
| Shaft | Stainless steel AISI 316 (EN 1.4401) |
| Mechanical seal | Graphite/ceramic |
Commercial documentation
Surface Catalogue 50Hz
Technical documentation
Generic instruction manual
SWS-SWT instruction manual
PZH
DownloadHow do I check the SWS-SWT' direction of rotation?
- Start the pump for a for a few moments;
- Position yourself looking at the pump on the fan side (rear);
- Check if the fan is turning clockwise according to the sticker arrow on the fan cover.
Can I extend the SWS-SWT pump's power cord without causing technical problems or affecting the warranty?
Yes. This operation has to be carried out by a specialised technician or at an authorised EBARA Service Centre. This avoids improper connections that can adversely affect the pump’s correct operation and the safety of the installation.
Is there an alternative mechanical seal to the standard one that is used on the SWS-SWT pump?
No optional mechanical seals are available.
More details
Do you need more information about this product? Send us your request.
Contact us
* Required
