HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
DAR
Submersible pump with vortex or dual-channel hydraulics and impeller, also available with float switch. The main feature is the large free passage which can be 50 or 65 mm depending on the model. Suitable for handling sewage for domestic and industrial use. Read more
Features
Vortex impeller
Dual-channel open impeller
Submersible sewage pump with vortex or dual-channel hydraulics and impeller, also available with float switch. Its peculiarity is the wide free passage, which is the same as the discharge diameter, which can be 50 or 65 mm depending on the model.
Piping connections are:
• threaded 50DAR
• flanged 65DAR
Continuing the tradition and the importance that EBARA gives to the pump's lifespan, the mechanical seals and the motor are in oil bath which allow cooling and better lubrication of the bearings.
Supplied with standard 10-metre cable.
For further technical information see the Databook
• Emptying of cesspits, soiled liquids collection pits and settling pits
• Pumping of soiled liquids with suspended solids
• Pumping of soiled liquids in domestic and industrial environments ideal for installation in domestic and residential lifting stations
Piping connections are:
• threaded 50DAR
• flanged 65DAR
Continuing the tradition and the importance that EBARA gives to the pump's lifespan, the mechanical seals and the motor are in oil bath which allow cooling and better lubrication of the bearings.
Supplied with standard 10-metre cable.
For further technical information see the Databook
• Emptying of cesspits, soiled liquids collection pits and settling pits
• Pumping of soiled liquids with suspended solids
• Pumping of soiled liquids in domestic and industrial environments ideal for installation in domestic and residential lifting stations
Technical data
| Flow rate | up to 42 m³/h |
| Total head | up to 10 m |
| Max. temperature of the liquid | + 25°C partially submerged pump + 35°C totally submerged pump |
| Poles | 2 |
| Max. solids passage | 50 - 65mm |
| Insulation class | F |
| Protection degree | IPX8 |
| Voltage | Single-phase 1~230V ± 10% Three-phase 3~400V ±10% |
| Max. immersion | 7 m with 10 m cable |
Materials
| Pump body | Cast iron |
| Impeller | Stainless steel AISI 304 (EN 1.4301) |
| Shaft | Stainless steel AISI 316 (EN 1.4401) |
| Mechanical seal | 50DAR: Impeller side: Graphite/Ceramic Motor side: NBR sealing ring 65DAR: Impeller side: Silicon Carbide/Ceramic Motor side: NBR sealing ring |
Commercial documentation
DAR Catalogue
Technical documentation
Data Book DAR 50Hz 2 poles
Generic instruction manual
DAR instruction manual
PZH
DownloadCan I extend/replace the power cord without causing technical problems or affecting the warranty?
Yes, anyhow this operation has to be carried out by a specialised technician or at an authorised EBARA Service Centre. This avoids improper connections that can adversely affect the pump’s correct operation and/or the safety of the installation.
How can I adjust the float switch in order to avoid problems when starting or stopping?
If the pump is fitted with a float switch, the latter must have enough room to move freely, so that it can switch and ensure a proper pump operation.
Please follow the directions provided in the instruction manual when the installation requires float switches that are fixed to the tank and are driven by a distribution board.
What should the dimensions of the handhole where I’m inserting the pump be?
It depends on the pump’s type and model.
Strictly follow the directions provided in the instruction manual.
What is the minimum amount of liquid that the pump must be submerged in?
Strictly follow the directions provided in the instruction manual.
More details
Do you need more information about this product? Send us your request.
Contact us
* Required
Submersible Catalogue 50Hz
Submersible Catalogue 60Hz
