HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Standardised cast iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. Available in three versions. Equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping. Many types of mechanical seals can be mounted on electric pumps to meet different requirements. Suitable for application in heating and air conditioning systems, water supply of civil, agricultural and industrial plants, pressurisation and fire-fighting. Read more
Flow rate | up to 138 m³/h |
Total head | up to 70,0 m |
Max. working pressure | 10 bar |
Max. temperature of the liquid | -5°C ÷ +75°C for H, HS, HW, HSW versions -5°C ÷ +90°C for standard and E versions |
MEI | > 0.4 |
Poles | 2 and 4 |
Insulation class | F (B for high temperature) |
Protection degree | IP55 |
Voltage | Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% (up to 4kW included) Three-phase 3~400/690V ±10% (from 5,5kW and above) |
Pump body | Cast iron |
Impeller | AISI 304 (EN 1.4301) AISI 316 (EN 1.4404) precision-cast for 3D SERIES 65 |
Shaft | AISI 304 (EN 1.4301) |
Mechanical seal | Standard = Ceramic/Carbon/NBR H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
Motor support | Cast iron for 32-200/3, 15, 18.5 and 22 kW models Aluminium for the rest of the range |
Contact us
* Required