HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Single threaded or flanged bronze circulators for three-speed domestic water circulation, with threaded or flanged connections. Read more
Flow rate | from 0.5 to 25.0 m³/h |
Total head | from 0.5 m to 12.0 m |
Max. working pressure | 10 bar |
Max. ambient temperature | 0 ÷ +40°C |
Max. temperature of the liquid | -10°C ÷ +65°C |
Insulation class | H |
Protection degree | IP43 for three-phase IP44 for single-phase |
Voltage | Single-phase 1~230V Three-phase 3~400V |
Connections | G½ / G1 / DN40 / DN50 / DN65 |
Min. suction pressure | 0.05 bar at 50°C 0.8 bar at 80°C 1.4 bar at 110°C |
Pump body | Bronze |
Impeller | Polyamide |
Shaft | Stainless steel AISI 420 (EN 1.4021) and 431 (EN 1.4057) |
Rotor can | Stainless steel AISI 316 (EN 1.4401) |
Can I change the circulator’s settings?
If the circulator has a display, its functions can be changed according to the system’s requirements.
What is the circulator's supply voltage?
The circulator’s supply voltage is 230V
What is the correct position and installation for circulators and in-line pumps?
Please check the pictograms in the instruction manual.
What percentage of glycol can be used in the system when the circulator is used for cooling?
The maximum amount of glycol that can be used is 20%.
Contact us
* Required