HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Standardised cast iron monobloc centrifugal pump with AISI 304 impeller for MD and cast iron impeller for MMD, with 2 and 4 poles motors with high energy efficiency. Equipped with a Back pull-out design that allows the motor block to be removed without having to disconnect the piping body for maintenance. Read more
Flow rate | up to 600 m³/h |
Total head | up to 92,7 m |
Max. working pressure | 10 bar |
Max. temperature of the liquid | -5°C ÷ +75°C for H, HS, HW, HSW versions -5°C ÷ +90°C for standard and E versions -10°C ÷ +90°C for MMD |
MEI | > 0.4 |
Poles | 2 and 4 |
Insulation class | F (B for high temperature) |
Protection degree | IP55 |
Voltage | Three-phase 3~230/400V ±10% (up to 4 kW included) Three-phase 3~400/690V ±10% (from 5.5kW and above) |
Pump body | Cast iron |
Impeller | AISI 304 (EN 1.4301) for MD Cast iron for MMD |
Shaft | Stainless steel AISI 304 (EN 1.4401) for MD Stainless steel AISI 420 (EN 1.4021) for MMD |
Mechanical seal | MD = Ceramic/Carbon/NBR MMD = Silicon Carbide/Silicon Carbide/NBR H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
Motor support | Cast iron |
Contact us
* Required