HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
Submersible pump entirely in AISI 304 stainless steel and open vortex impeller, which can be used in fixed and mobile installations. Suitable for domestic applications and large industrial wastewater lifting installations. Read more
Flow rate | up to 18 m³/h |
Total head | up to 9.5 m |
Max. temperature of the liquid | +50°C |
Poles | 2 |
Max. solids passage | 35 mm |
Insulation class | F |
Protection degree | IPX8 |
Voltage | Single-phase 1~230V ± 10% Three-phase 3~400V ±10% |
Max. immersion | 7 m with 10 m cable 2 m with 5 m cable |
Pump body | Stainless steel AISI 304 (EN 1.4301) |
Impeller | Stainless steel AISI 304 (EN 1.4301) |
Shaft | Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid) |
Mechanical seal | upper part in Carbon/Ceramic/NBR (motor side) lower part in Silicon Carbide/NBR (pump side) |
Can I extend/replace the power cord without causing technical problems or affecting the warranty?
Yes, anyhow this operation has to be carried out by a specialised technician or at an authorised EBARA Service Centre. This avoids improper connections that can adversely affect the pump’s correct operation and/or the safety of the installation.
Contact us
* Required