DMLV - DMLVF

Cast iron submersible pump with vortex impeller that facilitates the passage of solids and prevents clogging, usable in fixed and mobile installations. Suitable for pumping wastewater with suspended solids. Read more

Features

Possibility to use in fixed and mobile installations

Possibility to use in fixed and mobile installations

Vortex impeller

Vortex impeller

PZH
Cast iron submersible pump with vortex impeller that facilitates the passage of solids and prevents clogging, usable in fixed and mobile installations.
DMLV - DMLVF electric pumps are advanced technical solutions that provide high-level performance, especially in heavy-duty applications.
For further technical information see the Databook

• Soiled liquids
• Civil and industrial wastewater or liquids containing solid and/or filamentary substances in suspension

Technical data

Flow rate up to 168 m³/h (DMLV)
up to 200 m³/h (DMLVF)
Total head up to 41.3 m (DML)
up to 29.4 m (DMLVF)
Max. temperature of the liquid +40°C
Poles 2, 4, 6
Max. solids passage 80÷100 mm (DMLV)
30÷80 mm (DMLVF)
Insulation class F (DMLV)
H (DMLVF)
Protection degree IP68
Voltage Three-phase 3~380-415V -10 +6%
(DMLV 2.2 kW) - DOL
Three-phase 3~380-415V ±10%
(DMLV 3.7÷22 kW) - Y/Δ
Single-phase 1~230V ±10% (DMLVF)
Three-phase 3~400/690V ±10% (DMLVF)
Max. immersion 7 m with 10 m cable
Max. length of fibres 400 mm (80DMLV)
500 mm (100DMLV)

Materials

Pump body Cast iron
Impeller Cast iron
Shaft Stainless steel AISI 403 (EN 1.4006) (DMLV)
Stainless steel 420B (EN 1.4028) (DMLVF)
Mechanical seal Impeller side: Silicon carbide/Silicon carbide/NBR
Motor side: Carbon/Ceramic/NBR

Can I extend/replace the power cord without causing technical problems or affecting the warranty?

Yes, anyhow this operation has to be carried out by a specialised technician or at an authorised EBARA Service Centre. This avoids improper connections that can adversely affect the pump’s correct operation and/or the safety of the installation.

What should the dimensions of the handhole where I’m inserting the pump be?

It depends on the pump’s type and model.
Strictly follow the directions provided in the instruction manual.

How can I adjust the float switch in order to avoid problems when starting or stopping?

If the pump is fitted with a float switch, the latter must have enough room to move freely, so that it can switch and ensure a proper pump operation.
Please follow the directions provided in the instruction manual when the installation requires float switches that are fixed to the tank and are driven by a distribution board.

What is the minimum amount of liquid that the pump must be submerged in?

Strictly follow the directions provided in the instruction manual.


More details
Do you need more information about this product? Send us your request.

Contact us

* Required

Stay always updated and don't miss our news!

/ 02