HYDROSTATION
Hydrostation is the new IE5 efficiency class electronic system for constant pressure…
SF6
6" submerged well pump (hydraulic only), lightweight and easily transportable. Suitable for water supply. Read more
Features
Practical and easy to use
Sturdy design, corrosion resistant
Lightweight and easily transportable
6" submerged well pump (hydraulic only), it stands out for its lightness that makes it easily transportable and can be coupled with motors in a water bath or oil bath.
The SF6, with its sturdy, corrosion-resistant design, offers a wide range of performance.
For further technical information see the Databook
• Water supply systems for civil and industrial use
• Pressure boosting systems
• Irrigation and community waterworks
The SF6, with its sturdy, corrosion-resistant design, offers a wide range of performance.
For further technical information see the Databook
• Water supply systems for civil and industrial use
• Pressure boosting systems
• Irrigation and community waterworks
Technical data
| Flow rate | up to 66 m³/h |
| Total head | up to 362 m |
| Max. temperature of the liquid | +30°C |
| Poles | 2 |
| Insulation class | F (4" - 6" OY), (6" WY) B (4" WY) |
| Protection degree | IP 58 (4" - 6" OY), (6" WY) IP 68 (4" WY) |
| Voltage | Three-phase 3~400V ±10% |
| Max. immersion | 350 m with motor in water bath 150 m with motor in oil bath |
| Max. sand content | 50 ppm |
Materials
| Impeller | PPO reinforced with glass fibres |
| Shaft | Stainless steel AISI 420 (EN 1.4021) |
| Outer casing | Stainless steel AISI 304 (EN 1.4301) |
| Discharge casing | Stainless steel AISI 304 (EN 1.4301) |
| Motor connection | Stainless steel AISI 304 (EN 1.4301) |
Commercial documentation
Borehole Catalogue 50Hz
Technical documentation
Data Book SF6 50Hz 2 poles
SF6 instruction manual
PZH
DownloadI have a single-phase motor with a 4 wire output. How do I connect them?
The motor cable is standard for both single-phase as well as three-phase versions. For a single-phase motor, the brown wire has to be connected to the blue capacitor.
Can submersible pumps and motors operate submerging them in a tank?
Yes, it’s important to:
- position the electric pump properly,
- use a cooling sleeve
- ensure that the pump is submerged in at least 0.5 m of liquid.
Can submersible pumps and motors operate in an horizontal position?
Yes, what matters is that the they are properly aligned and positioned with the hydraulics and therefore collars have to be used to secure the pump to the tank’s bottom, this assures stability and a correct position.
More details
Do you need more information about this product? Send us your request.
Contact us
* Required
Instruction manual BSP, BSM, BSM 3S
Borehole Catalogue 60Hz
